Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B50L 01 - PA6 - BASF

Material Data Center offers the following functions for Ultramid® B50L 01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Propriedades específicas do material
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 3000 MPa ISO 527
Tensão no escoamento 90 MPa ISO 527
Deformação no escoamento 4.5 % ISO 527
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 220 °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 65 °C ISO 75-1/-2
ASTM Dados
Temperatura de fusão 220 °C ASTM D 3418
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 9.5 % Sim. to ISO 62
Absorção de umidade 2.6 % Sim. to ISO 62
Densidade 1130 kg/m³ ISO 1183
Moisture Content 0.06 % -
Absorção de água, equilíbrio 2.6 % ASTM D 570
Densidade 1130 kg/m³ ASTM D 792
Propriedades específicas do materialValorUnidadeMétodo de ensaio
ISO Dados
Índice de viscosidade 320 cm³/g ISO 307, 1157, 1628
Características
Processamento
Extrusão de filme soprado, Extrusão de tubos, Extrusão de perfis, Extrusão de chapas, Moldagem por sopro
Aditivos
Lubrificantes
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR
Aplicaciones
Polivalente
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.